At Hannah Restoration, we recently got a call from a homeowner in Murfreesboro, TN, who was dealing with water intrusion and kitchen flooring damage. Being in this business for a long time, we know that when water starts seeping into floors and walls, it can cause long-term damage if not handled right away. So, we knew what our job was: step in quickly, stop further damage, and make sure everything was completely dried by providing our proven water damage restoration in Murfreesboro, TN.
The Cause of the Damage: A Busted Outdoor Water Spigot
The issue started with a busted outdoor spigot. The homeowner didn’t realize it right away, but over time the water made its way into the kitchen and pooled beneath the hardwood flooring. By the time they noticed the damage, the floorboards had begun to swell and feel soft underfoot. That’s when they reached out to us.
How We Stopped the Spread of Water and Saved the Flooring
We arrived quickly and started our inspection. We knew we had to be fast, so the damage would stay contained to the kitchen flooring. Here’s how our team handled this project:
Inspecting and Measuring Moisture
We used moisture meters to check the kitchen flooring and subfloor to understand how far the water had spread. We also checked nearby baseboards and cabinets to make sure moisture hadn’t moved beyond the visible damage. We realized we didn’t have to remove any floorboards and we could save the flooring without any demo.
Containment Barrier
To keep the rest of the home protected during the drying process, we set up proper containment around the affected kitchen area. This helped us keep the area isolated and airflow contained in the kitchen for faster drying.
Setting Up the Injectidry System
To avoid ripping up the entire kitchen floor, we used our injectidry system. This system pulls moisture from under the surface without removing all the flooring. We placed the mats over the affected areas to pull water from deep inside the floorboards and subfloor.
Placing Drying Equipment
We placed a mix of air movers, dehumidifiers, and air scrubbers throughout the kitchen. Here’s how each one helped in the drying process:
- Air Movers: These pushed air across wet surfaces to speed up evaporation.
- Dehumidifiers: These removed excess moisture from the air to prevent further absorption.
- Air Scrubbers: These filtered the air to reduce any particles or odor caused by moisture.
Daily Monitoring and Adjustments
We checked the progress every day using moisture meters to make sure the floor was drying properly. We adjusted the placement of equipment as needed and made sure humidity levels stayed low to stop any potential mold from forming.
Final Checks and Cleanup
Once the flooring reached safe moisture levels, we removed all equipment and cleaned the area. We wiped down surfaces, vacuumed with HEPA filters, and applied an antimicrobial spray to keep mold from developing in the future.
How the Homeowner Felt After the Job Was Done
After everything was dry and cleaned, the homeowner told us they finally felt at ease again. The initial leak had them feeling overwhelmed, unsure of how bad the damage might get. But our fast response, clear communication, and careful work made them feel supported and informed every step of the way. They were especially grateful we were able to save their kitchen floor without any major demo!
Kitchen Flooring Damage in Murfreesboro? Call Us Today!
At Hannah Restoration, we take pride in helping homeowners recover from unexpected water damage quickly and professionally. Whether it’s a burst pipe, appliance leak, or storm damage, we know how to handle the mess, dry out your home, and get it ready for repairs.
If you’re dealing with water damage in Murfreesboro, TN, or anywhere in Middle Tennessee, give us a call. Reach out to our team at (615) 751-0410, or fill out this online form for a free estimate. We’re here 24/7 to help you recover!
